Seven PVC system series
Each series below is a complete profile series: frame, sash, middle registration and glazing bead, with the codes and dimensions exactly as printed in the source technical drawing catalogue. Every series has a detail page carrying its profile table, technical drawing and colour chart.
What do 60 and 70 mean?
Each series has a system width: the depth in millimetres of the main profile the frame and sash are built on. The range holds two series at 60 mm and three at 70 mm, plus the Toros series, which the catalogue states is compatible with both, and the sliding group, which is not classified on this measure.
System width determines the tooling a fabricator works with, so it is normally held constant across the parts of one project. A wider system does not mean higher performance: the catalogue publishes no performance values, and we publish nothing it does not document.
Family comparison
The comparison below rests only on what the catalogue prints: system width, system type, number of main profiles, number of documented colour codes, and the source page.
| Family | System width | Type | Main profiles | Colour codes | Source page |
|---|---|---|---|---|---|
| Erciyes | 70 mm | Window and door | 5 | 7 | 2 |
| Ilgaz | 70 mm | Window and door | 5 | 7 | 4 |
| Süphan | 70 mm | Window and door | 5 | Shared | 6 |
| Karaca | 60 mm | Window and door | 5 | 7 | 8 |
| Raman | 60 mm | Window and door | 5 | Shared | 16 |
| Toros | 60 - 70 mm | Window and door | 5 | 8 | 10 |
| Sliding Systems | - | Sliding | 11 | Shared | 12, 14 |
Series without their own colour chart in the catalogue use the printed range of another series, which we mark on the colours page.
Seven system series
Erciyes Series
Ilgaz Series
Süphan Series
Karaca Series
Raman Series
Toros Series
Sliding Systems
Glazing beads and auxiliary profiles are supplied from the same range.
Technical centre
Auxiliary profiles
Finishing and fixing parts that complete the system. Shown outside the seven system series because they are not a series of their own.
Lambri
Chambered cladding panels.
Glazing bead
Parts that hold the glass inside the frame.
Not settled on a series yet?
Send us the opening type, the sizes and your location, and we will help you fix the series, the codes and the finish.